CoLab Space
The CoLab has 7600 square feet of space over two floors with communal space and tools for working with wood, metal and textiles. We also have space for outdoor work and rentable semi-private areas. The CoLab offers short term storage for in-progress projects, free cubbies for storing tools and materials, and a small kitchen area for when you need to take a break.
Space
Tools
The colab has a wide range of tools for working with wood, metal and textiles, including:
Wood Tools
- Jointer
- Planer
- Sawstop table saw
- Chop saw
- Track saw
- Bandsaw
- Circular saw
- Jig saw
- Hand saws
- Lathe
- Drum sander
- Edge sander
- Spindle sander
- Pneumatic sander
- Domino & biscuit joiner
- Router table
- Hand-held router
- Dremmel
- Nail gun
- Drill press
- Hand drills
- Impact drivers
Textile Tools
- Sewing machines
- Sergers
- Leather-working tools
- Riveter
Metal Tools
- Metal
- MIG Welders
- TIG Welder
- Plasma cutter
- Metal bandsaw
- Metal chop saw
- Hand grinders
- Pedestal grinder
- Belt sander-grinder
- Metal drill press
- Metal lathe
- Milling machine
- Sandblaster
- Forge and anvil
- Power hammer
General Tools
- Work tables
- Compressed air
- Dust extraction system
- Ventilation system
- Spray tent
- Clamps
- Hammers & mallets
- Screwdrivers
- Allen tools
- Stapler
- Pliers
- Wrench and socket set
- Measuring tools
- Cutting tools
- Scraping tools
- Sharpening wheel
- Palette fork and jack
- Ladders
- PPE
Wood lathe and basic set of chisels and calipers.
Several chucks are available including a face-plate, spur-centre, and three jaw chuck.
The lathe is variable speed.
Outfeed turning is technically available, but would require the lathe to be re-positioned to allow sufficient space to safely turn.
We have the following types of clamps:
– Corner clamps
– Band clamps
– Pipe clamps (sizes range from ~3′ to ~8′)
– F-clamps (sizes from 6″ to 36′)
– C-clamps (smaller sizes)
– Squeeze clamps (small to medium size)
A variety of cauls are also available. These are typically wooden pieces with packing tape on one surface to ensure easy release from your workpiece after clamping.
SawStop Professional: cast-iron table, 52″ rip capacity & T-Glide Fence Assembly and Cabinet-mounted trunnion, interior motor MAX 3.0HP Power.
The table is mounted on a steel extension and connected to another Delta table saw on the other side.
Note: if you trigger the safety stop then you will need to replace the blade and cartridge. You can buy a cartridge on Lee Valley.
Additional comments:
– 220v
– 10″ blade
– 5/8″ arbor
– Can accomodate a dado stack
MANUAL
Cast iron table on wheels with fence, lift for precise height adjustment, dust extraction and powered by Bosch 1617 router with 2.25HP.
MANUAL
Cuts up to 3/8 in. mild steel.
MANUAL
Welds material from 22 gauge to 1/2 in thick in a single pass. Highest output in its class.
MANUAL
Welds materials from 22 gauge up to 1/2 in thick in a single pass.
MANUAL
You need planing? We have a 18 inches General International wood planer with helical head connected to our dust extraction system.
Safety notice: no painted materials or wood with metal inside the planer please.
NO METAL IN THIS TOOL. Not even just one little nail or staple. Metal detectors are available to check your wood prior to planing.
LT14 SUV Bandsaw with fourteen inches re-sawing capacity, 3HP motor.
We normally have an assortment of blades from 3/8 to 3/4 that you can use.
If you set the blades incorrectly you could damage the tool as it happened a few times before. Now we require people to get certified to change the blade.
MANUAL